<![CDATA[New Products from Theme Studio]]> http://www.theme-studio.co.uk/rss/catalog/new/ Wed, 23 May 2012 08:15:15 +0000 Zend_Feed en_GB http://blogs.law.harvard.edu/tech/rss <![CDATA[Source Four Jr Projector - flame / water effects Gobo]]> http://www.theme-studio.co.uk/source-four-jr-projector-effects-gobo.html

Source Four Jr Projector - Effects Gobo

30011 Tangential Breakup

 

provides a directional movement in the direction of rotation; and is most suitable for flames, flowing water and other effects where a single direction of movement is required.

The Infinity fits the gel frame of virtually all the spotlights in use today. It is entirely self contained and does not require additional controllers or power supplies.

Power
100-120VAC or 200-240VAC.
50/60 hz - Plug in transformer, onboard, user selectable.
Power Consumption: 500 mA.
Power Cord: 52" (132 cm).

Features
Onboard Speed selection via Potentiometer
Onboard Forward/Reverse/Off Switch

The Infinity™ device affixes to the gel frame of virtually any spotlight. You can choose from among 11 animation disks listed in the Rosco catalog and web site. Affix one of the disks to the device, place a steel or glass gobo in the gate, plug the Infinity into an outlet or dimemer and watch magic appear on your stage or studio. The Infinity is equipped with on-board control of the Infinity Disk speed and direction, as well as an on/off switch.

The Infinity™ device is entirely self-contained. You won't need additional controllers or power supplies. It will fit the gel frame of luminaries such as Altman 1-K and any fixture with 7-1/2" gel frame. It is also supplied with an adaptor plate for Source-4 sized fixtures or any luminary with a 6-1/4" gel frame. It is also supplied with a user specified Infinity Disk.

The Infinity Disks are stainless steel disks that are 16.5" (42 cm) in diameter and are available in eleven different etched pattern designs. The disks, being out of the focal plane, allows sharp focus on the gobo in the pattern slot while the rotating disk animates the effect of the gobo. The effect of rotating these disks creates moving effects such as fire, water or leaves. The key to the system is to choose the right gobo for the base effect.

 

Price:£ 55.00

]]> Wed, 23 May 2012 08:15:15 +0000 <![CDATA[KV2 Audio Speaker System (3Kw) - Hire Stock]]> http://www.theme-studio.co.uk/kv2-audio-speaker-system-3kw-hire-stock.html

EX 12 Extreme Resolution Active speaker system

EX 2.2 Double 12”, compact, active subwoofer system

There are lots of ‘Powered Speakers’ but at KV2 Audio, building an active speaker goes beyond bolting a Class D amplifier to the back of a box. We work towards creating the best technology in each distinct discipline then integrate each step into a powerful package within the context of a truly remarkable audio system.

No other comparable speakers can match the performance and resolution of the EX6, EX10 and EX12. That’s the beauty of an active loudspeaker design in which the amplifiers are perfectly matched to the transducers and every component is optimized.

Precisely selected amplifier topologies have been designed to deliver power through a unique LF amplifier for perfect control of the woofer, working alongside an HF amplifier implementing a discreet, classic class AB push- pull topology with Intermodulation Distortion (IMD) restricting output transformer.

The primary challenge in building a two-way speaker system is that the crossover point is usually in the middle of critical vocal frequencies. Getting the woofer to operate seamlessly up to and slightly beyond the crossover frequency is the reason why most two-way systems simply lack resolution and depth.

KV2 Audio has implemented a new Trans-Coil technology that eliminates voice coil inductance, resultingm in a flat impedance response above the resonance point.

This technology linearises acoustic and electrical phase response, reduces harmonic distortion and increases power transfer and transducer speed. The speaker now behaves like a woofer at lower frequencies and like a mid-range at
higher frequencies allowing a seamless transition at the crossover frequency.

For the high frequencies our Nitride Titanium compression drivers, using technology developed for Formula One racing, provide the lowest distortion in their class with an exceptionally smooth, accurate, open and extended high frequency response.

Complete on-board signal management
is provided including equalization, phase adjustment, crossover filters, thermal and overdrive protection. The EX6, EX10
and EX12 can be used as full range solutions or with the EX2.2 and EX2.5 Active Subwoofers.

The EX2.2 and EX2.5 each use a version of our proprietary high efficiency, high current switching amplifiers delivering 1000 and 1600 watts respectively at an efficiency of over 90%. Both provide incredibly high quality bass performance
and total flexibility from a standalone, small footprint cabinet.

    • High quality fixed installations.
    • Portable PA Systems for AV, speech and multimedia playback.
    • Small to medium-sized Live Music applications.
    • Mobile DJ (when used with EX2.2 or EX2.5 Active Bass Module).
    • Floor monitoring applications.
    Product
    System Acoustic Perfomance 
    -3dB Response
    55Hz - 22kHz
    -10dB Response45Hz - 30kHz
    Max SPL Long-term127dB
    Max SPL Peak130dB
    Crossover Point1.1kHz
     
    High Frequency Section 
    Throat Exit Diameter/ Diaphragm Size1.4" / 3"
    Diaphragm MaterialNitride Titanium
    Magnet TypeNeodymium
    Horn with Constant Directivity Coverage Horizontal/ Vertical80° x 40°
     
    Low Frequency Section 
    Acoustic DesignFront Loaded, Bass Reflex
    Woofer Size/ Voice Coil Diameter/ Design12" / 2.5" / Trans Coil
    Diaphragm MaterialEpoxy Reinforced Cellulose
    Magnet TypeNeodymium
     
    Signal Input 
    Input Impedance

    20 kΩ

    Input Sensitivity1.0V rms
     
    Power Connector 
    Power ConnectorNeutrik PowerCon®
     
    High Frequency Amplifier 
    TypeClass AB Push-Pull
    Rated Continuous Power50W
    Distortion<0.05%
    Operating Bandwidth1.1kHz - 30kHz
     
    Physical Dimensions 
    Height596mm (23.46")
    Width368mm (14.48")
    Depth368mm (14.48")
    Weight29kg (63.8lbs)
    Bass Amplifier Specification 
    TypeHigh Efficiency Switching
    Rated Continuous Power450W
    Distortion<0.05%
    Operating Bandwidth45Hz - 1.1kHz
     
    Recommended Amperage 
    Recommended Amperage6A 115V | 3A 230V
     
    Operating Voltage 
    Operating Voltage100 - 120V @ 60Hz | 230 - 250V @ 50Hz
    ProductEX2.2
    System Acoustic Perfomance 
    -3dB Response45Hz - 125Hz
    -10dB Response40Hz - 125Hz
    Max SPL Long-term130dB
    Max SPL Peak133dB
    Crossover Point125Hz
     
    Low Frequency Section 
    Acoustic DesignTwin Asymmetrical loading
    Woofer Size/ Voice Coil Diameter/ Design12" / 3" / Inside outside
    Diaphragm MaterialEpoxy Reinforced Cellulose
    Magnet TypeNeodymium
     
    Signal Input 
    Input Impedance20 kΩ
    Input Sensitivity1.0V rms
     
    Power Connector 
    Power Connector
    Power ConnectorNeutrik PowerCon®
     
    Physical Dimensions 
    Height491mm (19.33")
    Width596mm (23.46")
    Depth616mm (24.25")
    Weight49kg (107.8lbs)
     
    Bass Amplifier Specification 
    TypeHigh Efficiency Switching
    Rated Continuous Power1000W
    Distortion<0.05%
    Operating Bandwidth40Hz - 125Hz
     
    Recommended Amperage 
    Recommended Amperage10A 115V | 5A 230V
     
    Operating Voltage 
    Operating Voltage100 - 120V @ 60Hz | 30 - 250V @ 50Hz
     

Price:£ 350.00

]]> Wed, 23 May 2012 08:15:15 +0000